Pilot Configuration
Pilot Phase (Scoped Evaluation)
Up to 12 weeksTypical scope: multi-country, weekly updates, multiple categories
- Real data from real sources
- Live dashboards or export feeds
- Validate scope, refresh cadence, quality
- Fixed price, no ongoing commitment
Most teams start here to validate fit before expanding.
Now, schedule a short call below to confirm scope and start the pilot, or build something new.
or email us at paul@jsonify.co
Data sources are the websites and apps where information will be collected from. These can be changed or expanded at any time. This is turned into data rows.
| id | Source | Title | Authors | Journal | DOI | Published | KeyFinding | SustainabilityMetric | Last Checked | Access | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 |
|
High-throughput screening of recyclable polymer blends for automotive interiors | Li, H.; Martinez, S.; O'Connor, P. | Nature Materials |
|
Feb 2, 2026 | Identified a PET/biopolymer blend with >90% property retention after three mechanical recycling cycles; maintained flame retardancy with non-halogen additives ... show all |
Recovered material fraction: 78%; LCA GWP reduction: 32% vs. virgin polyolefin | Feb 4, 2026 | Subscription | ||
| 2 |
|
Electrochemical upcycling of mixed plastic waste to value-added monomers | Nguyen, T.; Patel, R.; Zhang, Y. | Journal of Cleaner Production |
|
Feb 1, 2026 | Selective electro-oxidation yields terephthalic acid with 68% yield from PET fractions under mild conditions ... show all |
Energy per kg product: 6.2 kWh; CO2eq: 1.8 kg/kg (projected industrial scale) | Feb 4, 2026 | Open Access | ||
| 3 |
|
Nano-reinforced biodegradable films with tunable degradation rates | Kovács, A.; Silva, J.; Müller, F. | Materials Science and Engineering: R |
|
Feb 3, 2026 | Cellulose nanocrystal loading of 4% increased tensile strength 42% while adjusting enzymatic degradation from 30 to 90 days ... show all |
Biodegradation half-life: 45 days (compost); Renewable content: 68% | Feb 4, 2026 | Hybrid | ||
| 4 |
|
Life cycle assessment of bio-based PE from sugarcane ethanol | Ramos, L.; Chen, X. | Polymers |
|
Feb 2, 2026 | Bio-PE reduces cradle-to-gate GWP by 20–28% relative to fossil PE depending on land-use change assumptions ... show all |
Cradle-to-gate GWP: 1.9–2.4 kg CO2e/kg; Renewable feedstock share: 85% | Feb 4, 2026 | Open Access | ||
| 5 |
|
Comparative teardown: multi-layer barrier films used in medical packaging | S. Park; D. Ahmed | Competitive Materials Analysis Report (preprint) |
|
Jan 31, 2026 | Found significant use of tie-layer adhesives with 15–25% petroleum-based polymers; most vendors use thin AlOx coatings for oxygen barrier ... show all |
Recyclability score (lab): 2/5 due to multi-material construction | Feb 4, 2026 | Preprint | ||
| 6 |
|
Additive manufacturing of continuous-fiber composites with recyclable matrices | Gomez, R.; Ito, M. | Materials Today |
|
Feb 3, 2026 | Demonstrated 3D-printed continuous carbon fiber parts using a reversible Diels-Alder polymer matrix with full fiber recovery ... show all |
Recycled fiber recovery: 95%; Matrix reprocessability cycles: 5 with <10% property loss | Feb 4, 2026 | Subscription | ||
| 7 |
|
Protein-inspired adhesives for solvent-free polymer welding | Schneider, K.; Rossi, E. | EMBO Reports |
|
Feb 2, 2026 | Mussel-mimetic catechol networks enable room-temperature welding of thermoplastics with lap shear strength comparable to solvent welding ... show all |
Solvent usage: 0 mL; Energy per weld: 0.02 kWh | Feb 4, 2026 | Open Access | ||
| 8 |
|
Photocatalytic depolymerization of polystyrene to styrene monomer | Ibrahim, A.; Chen, P.; Müller, L. | Nature Catalysis |
|
Feb 1, 2026 | Visible-light photocatalysis with organometallic complex yields styrene at 54% selectivity from PS waste under ambient conditions ... show all |
Energy input: 3.8 kWh/kg; Yield carbon recovery: 60% | Feb 4, 2026 | Subscription | ||
| 9 |
|
Teardown: premium reusable water bottle — fiber-reinforced cap innovations | Competitive Insights Team | Competitor Teardown Bulletin |
|
Feb 2, 2026 | Cap incorporates glass-fiber-reinforced polyamide for reduced creep; modular seals designed for easy replacement ... show all |
Estimated reparability: score 8/10; Replaceable-component rate: 65% by weight | Feb 4, 2026 | Paid | ||
| 10 |
|
Market shift: additives suppliers push biodegradable additives for polyolefins | Hernandez, M. | Plastics News Industry Analysis | n/a | Feb 3, 2026 | Several major additives suppliers launched pro-oxidant/enzymatic packages claiming 18–30% faster fragmentation in open-environment tests ... show all |
Additive treated polyolefin fragmentation time: 2.1 years (open-litter test) vs. 5.6 years baseline | Feb 4, 2026 | Free | ||
| 11 |
|
Global thermoplastic elastomer market — sustainability trends 2026 | Analyst Team | Market Research Insight | n/a | Feb 1, 2026 | Demand growing for TPEs with recycled content; >35% of new product launches in 2025 advertised >=30% PCR content ... show all |
Average recycled content claimed: 27%; CAGR for bio-based TPEs: 9.8% | Feb 4, 2026 | Paid | ||
| 12 |
|
Supplier benchmarking: masterbatch suppliers' decarbonization pledges | Sustainability Analytics | GlobalData Report | n/a | Jan 31, 2026 | Top 5 masterbatch suppliers set net-zero targets between 2040–2050; operational emissions disclosure improved 40% year-on-year ... show all |
Scope 1+2 reduction target median: 50% by 2035; Renewables share: 42% | Feb 4, 2026 | Paid | ||
| 13 |
|
High-flow bio-PA6 with 40% castor oil-derived polyol | R&D Team, Supplier Corp. | Technical Data Bulletin | n/a | Feb 2, 2026 | Formulation achieves similar mold cycle times to conventional PA6 with 40% bio-derived segment and maintained impact resistance ... show all |
Bio-based carbon content: 40%; Supplier EPD GWP: 2.1 kg CO2e/kg | Feb 4, 2026 | Free Registration | ||
| 14 |
|
Solid-state recycling of mixed polymer films via controlled compatibilization | Osei, K.; Dubois, J. | Nature Communications |
|
Feb 3, 2026 | Solid-state shear compounding with reactive compatibilizers restored elongation at break to 82% of virgin LDPE in mixed film streams ... show all |
Energy savings vs. melt-process: 28%; Mechanical recycling yield: 71% | Feb 4, 2026 | Open Access | ||
| 15 |
|
Hybrid inorganic-organic fillers for conductive recycled polypropylene | Singh, V.; Adeyemi, O. | Composites Part A |
|
Feb 2, 2026 | Graphene-oxide coated BaTiO3 particles provided percolation at 2.5 wt% in rPP with conductivity 1.2 S/m ... show all |
PCR used: 60%; Conductive filler embodied CO2: 0.45 kg CO2e/kg composite | Feb 4, 2026 | Subscription | ||
| 16 |
|
Quantifying microplastic release from biodegradable agricultural mulch films | Patel, S.; Rossi, G. | Environmental Science and Pollution Research |
|
Feb 1, 2026 | Biodegradable PLA-based mulches released 12% microfragments by mass under simulated tillage vs. 4% for starch-blend alternatives ... show all |
Soil fragment persistence: median 240 days; Carbon footprint per ha: 0.9 t CO2e | Feb 4, 2026 | Hybrid | ||
| 17 |
|
Catalytic hydrogenolysis for chemical recycling of polyolefins at pilot scale | Lopez, M.; Ivanov, D. | Catalysts |
|
Feb 3, 2026 | Pilot plant produced liquid hydrocarbons suitable for steam cracker feedstock with 62% mass yield from post-consumer PE/PP mix ... show all |
Process energy: 28 MJ/kg feedstock; Net GWP reduction vs. incineration: 55% | Feb 4, 2026 | Open Access | ||
| 18 |
|
Open-source protocol for automated FTIR fingerprinting of mixed polymer streams | Alvarez, P.; Kim, S. | Methodology Preprint |
|
Feb 2, 2026 | Algorithm classifies 8 common polymers with 96% accuracy using low-cost ATR-FTIR and ML post-processing ... show all |
False sorting rate: 4%; Potential increase in recycling yield: +12% | Feb 4, 2026 | Preprint | ||
| 19 |
|
Breakthrough: self-healing epoxy networks for extended service life of composites | Tan, Y.; Becker, H. | Materials Today Advances |
|
Feb 3, 2026 | Microencapsulated healing agents restored 89% of initial fracture toughness after 2 repair cycles at ambient conditions ... show all |
Estimated lifetime extension: +35%; Replacement material demand reduction: 31% | Feb 4, 2026 | Subscription | ||
| 20 |
|
Enzyme cocktails for rapid depolymerization of polyesters in seawater conditions | Ng, L.; Perez, O. | EMBO Advances |
|
Feb 1, 2026 | Engineered cutinase cocktail degraded PCL and PBS films >60% mass loss in 14 days at 20°C seawater conditions ... show all |
Biodegradation half-life in seawater: 6–10 days; Treatment enzyme concentration: 0.1 mg/L | Feb 4, 2026 | Open Access | ||
| 21 |
|
Design rules for circular polymer additives based on molecular weight distribution tuning | Singhal, P.; Meier, B. | Nature Sustainability |
|
Feb 2, 2026 | Broadening MWD of compatibilizer increased blend miscibility and recycling yield by 14% without compromising mechanical properties ... show all |
Recycling yield improvement: 14%; Additive mass fraction: 2% | Feb 4, 2026 | Subscription | ||
| 22 |
|
Competitive teardown: single-use coffee capsule — barrier coatings and aluminum reduction | Product Insight Team | Teardown Dossier |
|
Feb 3, 2026 | Newer capsules replaced full aluminum body with 12 μm Al film laminated to PLA to cut metal use by 78% while retaining barrier ... show all |
Aluminum content reduction: 78%; Compostability claim: industrial only | Feb 4, 2026 | Paid | ||
| 23 |
|
Industry adoption: certifications for recycled-content plastics ramp up | Ellis, J. | Plastics News | n/a | Feb 2, 2026 | Three major resin producers now offer certified PCR grades with batch-level traceability via blockchain tagging ... show all |
Average certified PCR content offered: 35%; Traceable batches: 100% in pilot | Feb 4, 2026 | Free | ||
| 24 |
|
Consumer willingness-to-pay for sustainable packaging — 2026 poll | Consumer Insights | Market Pulse | n/a | Feb 1, 2026 | 56% of surveyed consumers willing to pay 5–10% premium for verified recyclable packaging; 23% would pay >15% ... show all |
WTP median premium: 7%; Sample size: 8,400 respondents across EU/US/China | Feb 4, 2026 | Paid | ||
| 25 |
|
Technology radar: catalytic pyrolysis scale-up challenges and opportunities | Tech Strategy | GlobalData Technology Note | n/a | Jan 31, 2026 | Feedstock variability remains primary barrier; suggested solution is real-time sensor-based feedstock blending to stabilize product slate ... show all |
Projected plant GWP reduction vs. incineration: 48%; Required capital intensity: +22% vs. cracker feed pre-treatment ... show all |
Feb 4, 2026 | Paid | ||
| 26 |
|
Waterborne dispersion of recycled PVC for building materials | R&D Bulletin, Supplier Corp. | Technical Data Note | n/a | Feb 3, 2026 | Formulated stable aqueous dispersion of rPVC (50% solids) for render and siding applications with low VOCs ... show all |
PCR content: 60%; VOC <5 g/L; Energy saving in processing: 18% | Feb 4, 2026 | Free Registration | ||
| 27 |
|
Electrospun nanofiber membranes from upcycled polymer blends for filtration | Morales, E.; Chen, J. | Separation and Purification Technology |
|
Feb 2, 2026 | Membranes from rPET/rPS blends achieved 98.6% particulate capture (0.3 μm) with lower pressure drop than commercial counterparts ... show all |
Feedstock PCR fraction: 70%; Energy per m2 membrane: 4.1 kWh | Feb 4, 2026 | Subscription | ||
| 28 |
|
Assessing toxic byproducts from catalytic recycling of brominated flame-retardant plastics | Yamada, K.; Suleiman, R. | Environmental Chemistry Letters |
|
Feb 1, 2026 | Dehalogenation catalysts removed >95% bromine but generated trace brominated aromatics at ppm levels requiring downstream polishing ... show all |
Brominated byproduct concentration after treatment: <2 ppm; Required polishing energy: +6% process energy ... show all |
Feb 4, 2026 | Hybrid | ||
| 29 |
|
Mechanical performance of high-PCR-content marine-grade composites | Duarte, F.; Ibrahim, N. | Materials |
|
Feb 3, 2026 | Composites with 50% ocean-recovered PCR fibers retained 84% flexural strength and passed accelerated corrosion tests ... show all |
PCR content: 50%; Embodied carbon reduction: 38% vs. virgin composite | Feb 4, 2026 | Open Access | ||
| 30 |
|
Evaluation protocol for industrial-scale enzymatic polyester recycling | Bauer, L.; Mehta, S. | Protocol Preprint |
|
Feb 2, 2026 | Standardized metrics proposed for enzymatic process: TOF, enzyme stability cycles, and soluble oligomer profile to enable cross-facility comparisons ... show all |
Benchmark enzyme reuse cycles: target 500; Process water reuse: 85% target | Feb 4, 2026 | Preprint | ||
| Looking for more? Great news − this is just a small sample. Jsonify production workflows process anywhere from tens of thousands to millions of real data rows per run! | ||||||||||||
Filters
Total Research Articles Accessed
Top Competitor Products Analyzed
Material Supplier Trends
Current Sustainability Rating
Sustainability Metrics by Material
Key Research Insights
Research Breakthroughs Over Time
Recent Scientific Journals and Findings
| Source | Title | Authors | Publication Date | Key Findings |
|---|---|---|---|---|
|
|
Innovative Bioplastics from Renewable Resources | Smith et al. | 2026-01-10 | This study outlines the potential of bioplastics made from agricultural waste. |
|
|
Revolutionizing Material Usage: The Future of Green Composites | Johnson & Lee | 2026-01-05 | Highlights the decrease in carbon footprint by 30% using new composite materials. |
|
|
Advancements in Recyclable Plastics | Garcia et al. | 2025-12-29 | New recycling methods could improve material recovery rates by 25%. |
|
|
Nanomaterials: Sustainable Solutions for Electronics | Chen et al. | 2025-12-15 | Presents novel nanomaterials that enhance performance while being eco-friendly. |
|
|
Alternative Materials for Sustainable Packaging | Taylor & White | 2026-01-02 | Explores various alternatives to traditional packaging materials, emphasizing biodegradability. |
Breakdown of Sourcing Regions
Material Types in Recent Research
Competitor Product Teardowns
| Source | Product | Material Type | Sustainability Rating | Date |
|---|---|---|---|---|
|
|
EcoPack 3000 | Biodegradable Plastic | A+ | 2026-01-01 |
|
|
RecycloFlex 200 | Recycled PET | A | 2026-01-05 |
|
|
GreenWrap | Compostable Polymer | A+ | 2025-12-20 |
|
|
SmartPolymer 1.2 | Smart Material | B | 2026-01-08 |
|
|
Durable Bioplastics | Bioplastic Blend | B+ | 2026-01-10 |
|
|
NanoPack | Nanomaterial | A- | 2026-01-12 |
|
|
FlexiPlastic | Flexible Plastic | C | 2026-01-07 |
|
|
BioShield | Biodegradable Barrier | A | 2026-01-03 |
Sustainability Metric Trends
Loading...
Loading...
Radar continuously monitors your selected web sources and alerts you the moment something changes.
+7
Data connections determine where the collected data will be delivered. You can add, remove, or change connections at any time.